The installation and removal of drainage pipes is a very important work in the construction and decoration process. The steps of installation and removal of drainage pipes will be introduced in detail below, and some precautions will be listed to better complete this work.
1、 Installation steps of drainage pipes:
Pre measurement: Before the installation of drainage pipes, accurate measurement is required to determine the required pipe length and angle.
Preparation: Before installing drainage pipes, the working area needs to be cleaned to ensure that there are no obstacles and sundries. At the same time, prepare the necessary fittings, connectors and tools to ensure that everything is ready.
Cutting pipe: according to the previous measurement results, use a special pipe cutting tool to cut the pipe to the required length.
Connecting pipes: as required, apply appropriate PVC glue on the ends of the two pipes to be connected, and then connect the two pipes to ensure a firm connection.
Use connector: For pipes to be connected, special connectors can be used to connect them to ensure that the connected structure is firm and reliable.
Fixing pipes: When installing drainage pipes, it is necessary to ensure that the pipes are firmly fixed. Special pipe clamps or brackets can be used to fix the pipes on the wall or ground to ensure their stability.
Testing: After the installation of pipes, testing is required to ensure the normal operation of the drainage system. Turn on the tap or other water source, observe whether the drainage pipe is unobstructed, and check whether there is water leakage.
Hainan Municipal Pipeline
2、 Disassembly steps of drainage pipes:
Turn off the water source: before dismantling the pipes for drainage, be sure to turn off the water source and ensure that there is no ponding in the drainage system.
Clean up the work area: clean up the sundries and obstacles around the work area, and clean up the connection points at both ends of the pipes to be removed.
Dismantle connector: for pipes with connectors, the connector needs to be disassembled first. You can use a wrench or wrench to loosen the bolt or buckle on the connector, and then remove the connector from the pipe.
Dismantling the fixed support: Dismantling the fixed support or clamp on the pipe can use a wrench or screwdriver to loosen the fixed bolt or screw.
Dismantle pipe fittings: Dismantle the joints of pipes as required. Special tools, such as pipe tongs or scissors, can be used to forcibly rotate or cut the glue at the joint to separate the two pipes.
Remove pipes: take out the dismantled pipes and place them in a safe place for subsequent treatment.
matters needing attention:
Safety first: pay attention to safety when installing and disassembling drainage pipes. Wear labor protective clothing, gloves and goggles to avoid injury.
Selection of tools: select suitable tools for installation and disassembly, such as pipe cutting tools, electric drills, wrenches, etc. Pay attention to correct operation when using tools to ensure smooth operation.
Accurate measurement: before installing drainage pipes, the measurement needs to be accurate, and the measurement results should be recorded for future installation.
Use of glue: When using glue to connect pipes, be sure to select reliable glue and use appropriate amount to avoid using too much or too little glue, which will affect the connection quality.
Drainage test: after the installation of pipes, it is very important to conduct drainage test. Ensure that the system is unobstructed, and timely find and solve drainage problems.
Dismantling attention: When dismantling pipes for drainage, be careful to avoid damage to pipes or other ancillary facilities.
Conclusion: Be careful and patient when installing and removing pipes for drainage, and operate according to relevant procedures. At the same time, pay attention to work safety, be familiar with the correct method of using tools, and pay close attention to the operation of the system. Proper installation and disassembly can ensure the normal operation of the drainage system and effectively prevent floods, soil erosion and other problems.
